Daglas-Covered Round Copper Conductor
ISO-CU-DGL-R155
CROSS-SECTION & LAYERS
Daglas Insulated Copper Wires
The core and insulation layers are shown to scale as a representation; refer to the datasheet for exact thickness and tolerance values.
APPLICATIONS
Where Is This Product Used?
The gold area in the scenes shows where the conductor sits in the machine.
ALSO Electromagnet coils
Lifting magnets
Brake coils
Industrial windings
Heating elements
Product Description
Daglas insulation is formed by braiding synthetic and glass-based yarn around the conductor. The braid structure provides much higher surface friction resistance than film or enamel coatings; the insulation is not stripped as the conductor passes through winding guides.
The porous insulation allows the impregnating varnish to penetrate the braid fully. After curing, the varnish saturates the braid and the dielectric strength rises markedly. Daglas-insulated conductor should therefore be considered not un-impregnated but as part of the winding process.
The product is offered as standard with a binder system of thermal class 155 (F); it is also produced with a 180 (H) class binder on request. Conductor dimensions are set to the dimension approach of the IEC 60317 series.
Applications
Electromagnet coils, lifting magnets, brake coils, industrial windings, heating elements.
Related Products
Kapton-Wrapped Round Copper Conductor
ISO-CU-KPT-R240
Glass-Fibre Insulated Rectangular Copper Conductor
ISO-CU-CEL-F180Technical Documentation
| Conductor Material | Electrolytic Copper (Cu-ETP, 99.9%) |
| Standard | IEC 60317 |
| Conductor Size | 0.8 – 5 mm |
| Thickness / Grade | 0.20 – 0.45 mm braid layer |
| Surface | Bright |
| Product Code | ISO-CU-DGL-R155 |
| Thermal Class | Class 155 (F) |
| Build Increase | 0.20 – 0.45 mm braid layer |
| Conductor Section | 0.50 – 19.60 mm² |
| Insulation Type | Daglas iplik braid |
| Winding Type | Braid insulation |
| Test Certificate | IEC 60851 test raporu |
Our Daglas-Covered Round Copper Conductor product is supplied in accordance with internationally accepted manufacturing and inspection standards. Dimensional tolerances, material chemical analysis and mechanical values meet the requirements of the relevant standard.
- Manufacturing standard: IEC 60317
- Conductor material: Electrolytic Copper (Cu-ETP, 99.9%)
- Thermal class: Class 155 (F)
- Wall thickness: 0.20 – 0.45 mm braid layer
- Diameter range: 0.8 – 5 mm
- Visual inspection and dimensional control are carried out before shipment.
If your project requires a different standard, you can consult our technical team for alternative products.
On request, the products we supply are shipped together with an EN 10204 3.1 material certificate. Our quality management system and product documents are updated regularly; batch-based traceability is provided.
Communicating your certificate request at the quotation stage speeds up the shipment process.
ISO 9001:2015 Quality Management System
ISO 14001 Environmental Management System
ISO 45001 Occupational Health and Safety Management System
EN 10204 3.1 Material Certificate
IEC 60317 Declaration of Conformity
IATF 16949 Automotive Quality Management System
REACH Declaration of Conformity
RoHS Declaration of Conformity
Note: The values in the datasheet are nominal. For requests outside the standards and dimensions above, reach us through the quote form; non-catalogue dimensions are planned according to the production schedule.