Polyester-Mylar Wrapped Rectangular Aluminium Conductor
ISO-AL-MYL-F130
CROSS-SECTION & LAYERS
Polyester Film Insulated Wires
The core and insulation layers are shown to scale as a representation; refer to the datasheet for exact thickness and tolerance values.
APPLICATIONS
Where Is This Product Used?
The gold area in the scenes shows where the conductor sits in the machine.
ALSO Resin-cast dry-type transformers
Light reactors
Distribution transformer low-voltage windings
Ballast coils
Product Description
Polyester film insulated aluminium conductor is used in windings where both weight and insulation cost are optimised. The thin film insulation partly offsets the volume the large section required by aluminium occupies in the winding window.
The natural oxide layer of the aluminium surface bonds well with the film adhesive; however, this layer must be removed at connection ends. The film wrap is applied with an overlap ratio suited to the corner radius so the conductor corners do not stress the insulation during winding.
The film material complies with IEC 60674 requirements. The product is preferred in resin-cast dry-type transformers and in enclosed windings where moisture uptake must be kept low.
Applications
Resin-cast dry-type transformers, light reactors, distribution transformer low-voltage windings, ballast coils.
Related Products
Kapton-Wrapped Round Copper Conductor
ISO-CU-KPT-R240
Glass-Fibre Insulated Rectangular Copper Conductor
ISO-CU-CEL-F180Technical Documentation
| Conductor Material | EN AW-1350 Aluminium |
| Standard | IEC 60674 |
| Conductor Size | 3 – 16 mm |
| Thickness / Grade | 1.00 – 5.00 mm |
| Surface | Soft annealed |
| Product Code | ISO-AL-MYL-F130 |
| Thermal Class | Class 130 (B) |
| Build Increase | 1.00 – 5.00 mm |
| Conductor Section | 3.00 – 78.00 mm² |
| Insulation Type | Polyester (Mylar) film |
| Winding Type | Helical tape winding |
| Test Certificate | IEC 60851 test raporu |
Our Polyester-Mylar Wrapped Rectangular Aluminium Conductor product is supplied in accordance with internationally accepted manufacturing and inspection standards. Dimensional tolerances, material chemical analysis and mechanical values meet the requirements of the relevant standard.
- Manufacturing standard: IEC 60674
- Conductor material: EN AW-1350 Aluminium
- Thermal class: Class 130 (B)
- Wall thickness: 1.00 – 5.00 mm
- Diameter range: 3 – 16 mm
- Visual inspection and dimensional control are carried out before shipment.
If your project requires a different standard, you can consult our technical team for alternative products.
On request, the products we supply are shipped together with an EN 10204 3.1 material certificate. Our quality management system and product documents are updated regularly; batch-based traceability is provided.
Communicating your certificate request at the quotation stage speeds up the shipment process.
ISO 9001:2015 Quality Management System
ISO 14001 Environmental Management System
ISO 45001 Occupational Health and Safety Management System
EN 10204 3.1 Material Certificate
IEC 60317 Declaration of Conformity
IATF 16949 Automotive Quality Management System
REACH Declaration of Conformity
RoHS Declaration of Conformity
Note: The values in the datasheet are nominal. For requests outside the standards and dimensions above, reach us through the quote form; non-catalogue dimensions are planned according to the production schedule.